Alinco DJ-S40 Instruction Manual download pdf (Page 34)

7.Special Functions

7-1-2 Alarm

When the cable is pulled out or cut, the alarm will start sounding.

While alarming, all of the key operations are disabled including the power switch.

However, receiving is activated on the frequency recorded in the CH-SC (alarm

channel).

■ How to Stop the Alarm

When a signal is received and the squelch is unmuted during the alarm, the

alarm is canceled and the unit returns to the "receive" mode (A TSQ setting is

also a valid squelch setting).

It is possible to cancel the alarm using another transceiver from a remote place.

1. To cancel the alarm, detach the battery pack.

2. To set the alarm again, attach the battery pack and turn the power OFF.

Caution: Use the same battery pack that was in place when the alarm

function was activated (if an external power supply is used, the

alarm will continue sounding).

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

No comments

Alinco DJ-S40 Instruction Manual Page 34