Alinco DR-635 User Manual download pdf (Page 65)

XBR (Crossband Repeater) Mode (for the DR-635T Only)

This mode allows the DR-635T to operate like a repeater using both VHF and UHF bands. That

is, when receiving a signal on one band, the DR635T automatically transmits the same signal on

another band simultaneously.

△

Notes:

･

The MAIN band setting cannot be altered in XBR mode.

･

Any combination of VFO, memory, or CALL channels can be set as

receiving and transmitting frequencies of the XBR as far as they are V/UHF

combination within the transmitter’s coverage.

･

The XBR doesn’t support digital modes such as packet and digital-voice.

･

The Tone-Squelch feature supports the XBR mode to filter unwanted

signals, however, the DCS feature doesn’t.

･

The XBR respects the offset direction and range settings of the transceiver

mode.

･

The TOT function is usable but TOT penalty-time and BCLO functions

become deactivated during the XBR operation.

Accessing or exiting the XBR Mode

Turn the power on while holding the BAND key pressed.

★ and Ｒ icons appear on the screen. Repeat the same sequence to exit from the XBR mode.

End of document / PF0104

1 2 ... 60 61 62 63 64 65 66

No comments

Alinco DR-635 User Manual Page 65