Alinco DR-635E Instruction Manual download pdf (Page 31)

Parameter Setting Mode

TOT Penalty

When transmission is shut down in the TOT mode, this function prohibits another transmission

during a selected TOT penalty period regardless of the PTT key being pressed. A beep sounds

when the PTT key is pressed during the TOT penalty period. If the PTT is continuously pressed

over both TOT and the TOT penalty period, this function will be automatically cancelled.

Setting the TOT penalty time

In case the setting time is 5 seconds

Time-Out-Timer (TOT)

The TOT feature is popular in repeater systems. It prohibits users from transmitting on the repeater

after a certain period of time has elapsed. By setting this function and activating it according to the

repeaters’ requirement, the radio alerts the user by a beep 5 seconds prior to time-out. When the

time is expired, transmitting stops and the transceiver automatically returns to the receiving mode.

This avoids the repeater going into its TOT mode. Until the PTT is released once and pressed again,

the transceiver will not transmit.

1. In this Menu, the default display shows TOT-

OFF.

2. Rotate the main dial to select the desired time-

out time. The display should change as shown.

The number followed by TOT is the time-out

time in seconds.

The TOT feature is selectable up to 450 sec-

onds (7.5 minutes).

During the setting time of 60 seconds

TOT OFF TOT 30 TOT 60 TOT 450

1. The [TOTP OFF] icon appears on the display.

2. By rotating the main dial, the display changes

as below and TOT penalty setting is changed.

The penalty time can be set up to 15 seconds.

TOTP 0FF TOTP 1 TOTP 4 TOTP 15

(Refer page 27 for how to enter the setting mode.)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 65 66

No comments

Alinco DR-635E Instruction Manual Page 31