Alinco DJ-S17 User Manual download pdf (Page 28)

4.Basic Operation

4.5.2 Recalling a Memory Channel

1. Select the Memory mode by pressing the key. " " and channel number

appear on the display to indicate that the unit is in the Memory mode.

Repeat to switch between the Memory, Call channel and VFO modes.

2. Select a memory channel.

Rotating the main dial will increase or decrease a memory channel number.

4.5.3 Deleting a Memory Channel

1. Select the Memory mode by pressing the key.

2. Rotate the dial to select the memory channel No. that you wish to delete.

3. Press the FUNC key, and while is displayed on the LCD, press the key. A

beep sounds, then " " flashes on the display. If disappeared before pressing

the key, press the FUNC key again and then key.

4.5.4 How to Program Call Channel

1. Select the Memory mode by pressing the key. " " appears on the display.

2. Rotate the dial to display " ".

3. Press the key twice to switch to the VFO mode, and rotate the dial to select the

desired frequency and set other parameters.

4. Press the FUNC key and while is displayed, press the key. A beep sounds

and programming is completed. If disappeared before pressing the key,

press the FUNC key again and then key.

4.5.5 Programming a Repeater-Access Function Setting

The "Repeater-Access" function is to set the desired shift and tone parameters to the current

operating frequency by just 2 key-touches. Parameters programmed in the Repeater-Access

function memory can be used in any of the VFO/Memory/Call channel modes.

Although parameters programmed in the Set mode are maintained at any frequency,

those programmed in the Repeater-Access function memory are applied to the

operating frequency only by using the Repeater-Access function (page 41). Thus, it is

recommended that you use this function in amateur radio where you communicate by

frequently switching between simplex and semi-duplex operations.

NOTE:

When " " is flashing in step 3 (when the memory contents are displayed as is

on the display), it is still possible to cancel the operation by pressing the FUNC

key, and while is displayed on the LCD, press the key. After changing

channels or modes, this is no longer possible.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 65 66

No comments

Alinco DJ-S17 User Manual Page 28