Alinco DJ-S17 User Manual download pdf (Page 40)

7.Special Functions

7. Special Functions

Use this function when the receiving signal is interfered by strong signals of nearby

channels. When you activate this function, the transceiver attenuates the receiving

sensitivity.

1. Select the menu 17 in the Set mode to display the current ATT setting.

2. Rotate the dial to change the ATT level. There are 2 levels; ATT-1 attenuates the

received signal by 10dB and ATT-2 does 20dB. Press any key other than the MONI

or FUNC key to complete setting. Observe that " " appears on the display.

Select ATT-OF in the setting sequence, and then press MONI or FUNC key to turn

off this function. Observe that " " disappears from the display.

Repeating improper recharge of the Ni-MH battery pack may cause so-called the

"memory effect" that the battery holds less charge. To avoid this, it is always

recommended to fully discharge the battery pack then full charge. This function helps

discharging the battery pack. Please remove the unit from a charger or a DC cable

before this operation.

1. Activate the Keylock (page 33).

2. Press the FUNC key, and while is displayed,

press the key twice, the key twice, the

key twice, and then the key twice.

"DISCHG" will be displayed on the LCD, and the

battery-refresh starts.

3. To cancel this operation, just turn off the unit, turn it on again, then unlock the

Keylock function.

4. The unit will turn off automatically when finished the refresh.

Battery Refresh

7.2

ATT-OF AT T- 1 ATT-2

ATT (Attenuator)

7.1

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

No comments

Alinco DJ-S17 User Manual Page 40