Alinco DJ-X3 User Manual download pdf (Page 10)

■

Battery Recharger

· Recharging with the EDC-105

1. Mount NiMH battery pack on the

transceiver. (The NiMH battery

pack can also be placed in the

battery recharger.)

2. Connect AC adapter plug to the

battery recharger.

3. Select position 1 to 3 with the lever

on the recharger and adjust the

battery pack to fit in it. (According

to different types of battery packs,

the position of the lever changes.)

4. Set the battery pack in the

recharger making contact with

terminals on the rear side of the

transceiver and those on the

recharger.

5. Connect the power plug to the AC

outlet.

6. The red light on the recharger

goes on and starts to recharge the

battery. (While connected to the

AC outlet, the charge is

maintained.)

Caution!

· When battery temperature exceeds a certain level, a protective function

operates automatically and turns off the charge. (The red light goes off.)

Should this happen, unplug the recharger and dismount the transceiver or

the battery pack immediately. After removing the cause of the problem,

you may resume use of the battery recharger.

· Turn the transceiver power off before recharging the battery pack.

· Disconnect the EDC-105 from the outlet while not using it.

· Never charge the battery packs of other manufacturers with this charger.

· The required recharging time depends on the condition and model of a

battery pack, but it may take at most 10 hours. Refer to the instruction

manual of the battery pack.

· Never short-circuit the recharging terminals of this recharger with metal

objects, etc. The charger can be damaged.

· The ECD-105 does not work when the voltage from the wall outlet is

extremely low.

AC adapter plug

Terminals

(rear side)

Terminals

on the rechager

Lever(1 3)

Power plug

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

Comments to this Manuals

No comments

Alinco DJ-X3 User Manual Page 10

Comments to this Manuals

Related products and manuals for Walkie Talkies Alinco DJ-X3