Alinco DJ-X3 User Manual download pdf (Page 29)

Basic Operation

Setting the Tuning Step

The tuning step sets the increment/decrement of each click of the dial when

adjusting the frequency in VFO mode.

Switch to VFO mode by pressing the [V/P/M (MW)] key.

Press the [FUNC/ENTER] key.

"F" will appear on the display.

Press the [MONI(ST/SK)] key.

The currently selected tuning step will appear on the display.

The default setting is AUTO. ("AUto")

Select a tuning step by rotating the dial from the following:

5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, or AUTO. (Unit: kHz)

Press the [FUNC/ENTER] key.

Setting is completed, the receiver returns to the VFO mode.

Tip

· AUTO is for selecting the suitable tuning step and modulation mode

automatically.

· When AUTO is selected, it is not possible to change the modulation mode.

POWER

SCAN

SCRT

V/P/M

BANK

1M/10M

2,5

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 51 52

No comments

Alinco DJ-X3 User Manual Page 29