Alinco DJ-X2000 User Manual download pdf (Page 30)

After finishing the setting, press the key. The display will return to the

TIMER menu. Point the arrow at END and then press the key.

(Alternatively, you may press the key, and then press the key while

is shown on the display.)

Note: • If you exit the TIMER menu by pressing the key, the setting is

canceled.

• If you set the ON timer again, the power is turned ON after the set time has

elapsed from the time when the key is pressed.

• If the battery is removed or if the hardware reset key is pressed, the setting

is canceled.

2.14 Basic modes

The DJ-X2000 has three basic modes: VFO, PMS, and MR. The current mode is

displayed along the top of the display.

• VFO mode

This mode is used to select a frequency with the dial or UP/DOWN key and then

receive signals at that frequency. The VFO mode was selected at factory.

• PMS (programmed scan-range) mode

This mode is for tuning in selected channels within a set scan range.

• MR (memory) mode

This mode is for saving often used frequencies in memory. The frequencies can

then be retrieved and tuned in.

2.14.1 VFO mode

The VFO mode has two bands: A and B.

• To enter the VFO mode

Press the key. This will engage

the VFO mode. (If the VFO mode is

already engaged, pressing the

key will switch between bands A and

B.)

To tune in frequencies or switch bands, see "2.4 Setting

frequency" on page 20 and "2.5 Switching frequency band"

on page 22.

A=B

VFO

A=B

VFO

M NAME

SET



HELP

MONI

SRCH

LAMP

SQL VOL

DOWN UP

HELP

SET

CLR

SKIP

HELP

SET

HELP

SET

A 145. 34

b8.

HELP

SET

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 87 88

Comments to this Manuals

No comments

Alinco DJ-X2000 User Manual Page 30

Comments to this Manuals

Related products and manuals for Walkie Talkies Alinco DJ-X2000