59
• Erasing the recorded data
1
Call up the recording screen.
Press the key, and then press
the key while is shown
on the display.
The recording screen will appear.
2
Erase the recorded data.
Press the key. The recorded data will be erased.
3
Exit the recording mode.
Press the key.
3.1.29 Sound pickup
The sound picked up through the microphone can be amplified and heard using
an earphone or external speaker.
• Picking up sound
1
Connect an earphone or external speaker to the SP terminal on the
top of the DJ-X2000.
2
Start picking up sound.
Press the key, and then press
the key while is shown
on the display.
The sound pickup will start.
• Canceling the sound pickup
Press the key.
Note: • If no earphone or external speaker is connected, the sound pickup does
not function. If you try to use this function without connecting any earphone
or external speaker, the beep sound is emitted and the message “INSERT
EARPHONE” appears on the display.
• Only the POWER switch, VOL key, and key are valid during the
sound pickup.
• If howling occurs, turn down the volume or keep the earphone or external
speaker away from the microphone.
Comments to this Manuals